What Is Your Subnet Mask?

What is subnet mask with example?

Example: A class C network would have a subnet mask of 255.255.

255.0 which means that 24 bits are used for the network.

In CIDR notation this is designated by a /24 following the IP address..

What is a 192.168 IP address?

Using 192.168. 192.168. 0.0 is the beginning of the private IP address range that includes all IP addresses through 192.168. … One common IP address assigned to home routers is 192.168. 1.1. This IP address is used because the router is on the 192.168.

What is a 255.255 254.0 subnet?

255.255.254.0 = 23 bits mask = 510 hosts (512 -2 ) 255.255.252.0 = 22 bits mask = 1022 hosts (1024 -2 ) 255.255.248.0 = 21 bits mask = 2046 hosts (2048 -2) You always multiply by 2 or divide by 2..and remove 2 hosts (broadcast and network)

How do I know my subnet mask?

In the Windows search fields, type cmd, to open command prompt.Press Enter.Type ipconfig/all press Enter.Find your network settings.Your PC’s IP address and your network Subnet Mask and Gateway will be listed.

What is my IP and subnet mask?

The most simple way to find your own subnet mask is to run a simple command line in windows. Simply press the Windows key and “R” at the same time to open the command prompt and type “cmd” followed by “enter.” This will allow you to see your subnet mask (as shown below!).

What is subnet mask and why it is used?

A subnet mask is used to divide an IP address into two parts. One part identifies the host (computer), the other part identifies the network to which it belongs. To better understand how IP addresses and subnet masks work, look at an IP (Internet Protocol) address and see how it is organized.

What is difference between subnet and subnet mask?

A subnet denotes a range of addresses that can be allocated to hosts, such as 192.168. … The subnet mask is the classical way of representing which bits are part of the network portion of the address vs. the host bits of the address. The subnet mask for a /24 network is 255.255.

What does the mask 255.255 0.0 tell you?

A subnet mask is used to tell the network devices (whether it be the computer or any routers, modems, etc.) … Likewise, if the subnet mask is 255.255. 0.0, then the computer will assume that every IP address in its local network will be in the format of 192.168.

Is subnet mask always 255?

hmm Almost every small network uses a subnet mask of 255.255. 255.0 and this allows for 255 IP addresses on that network. … A subnet mask is a binary mask made up of all 1, contiguous.

Why subnetting is required?

The main purpose of subnetting is to help relieve network congestion. Congestion used to be a bigger problem than it is today because it was more common for networks to use hubs than switches. When nodes on a network are connected through a hub, the entire network acts as a single collision domain.

How many types of subnets are there?

There are two types of Subnetting FLSM and VLSM. In FLSM, all subnets have equal number of host addresses and use same Subnet mask.

What is the difference between CIDR and subnet mask?

The term Subnetting is generally used when you use it at the organizational level. CIDR is generally used when you it at the ISP level or higher. In any event, it is only important to know that both terms really refer to the same concept. On local area networks, we use the concept of a subnet mask.

How subnetting is done?

Subnetting is the process of stealing bits from the HOST part of an IP address in order to divide the larger network into smaller sub-networks called subnets. … We always reserve an IP address to identify the subnet and another one to identify the broadcast subnet address.

What is a 255.255 subnet?

A subnet mask of 255.255. 255.0 allows for close to 256 unique hosts within the network (since not all 256 IP addresses can be used). … This is the default subnet mask used by Class B networks and provides up to 65,536 IP addresses (256 x 256). The largest Class A networks use a subnet mask of 255.0.