Quick Answer: What Is The Binary Notation For The 255.255 255.0 Subnet Mask?

What destination adress is 255.255 255.255 for?

A special definition exists for the IP address 255.255.


It is the broadcast address of the zero network or 0.0.

0.0, which in Internet Protocol standards stands for this network, i.e.

the local network..

How many networks can you split a 255.255 255.0 mask?

A subnet mask of 255.255. 255.0 would give you lots of networks (2 16) and 254 hosts. A subnet of 255.255. 0.0 would give you lots of hosts (approx 216) and 256 networks.

What does a subnet mask of 255.255 255.0 mean?

A subnet mask of 255.255. 255.0 allows for close to 256 unique hosts within the network (since not all 256 IP addresses can be used). … This is the default subnet mask used by Class B networks and provides up to 65,536 IP addresses (256 x 256). The largest Class A networks use a subnet mask of 255.0.

What is the loopback IP address 127.0 0.1 used for?

127.0. 0.1 is the loopback Internet protocol (IP) address also referred to as the localhost. The address is used to establish an IP connection to the same machine or computer being used by the end-user.

What is IP loopback address?

A loopback address is a special IP address, 127.0. 0.1, reserved by InterNIC for use in testing network cards. This IP address corresponds to the software loopback interface of the network card, which does not have hardware associated with it, and does not require a physical connection to a network.

How do I find my subnet mask for binary?

255.0 in slash notation:Convert the subnet mask to binary. In this example, the binary representation of 255.255. 255.0 is: … Count each 1 in the subnet mask. In this example, there are twenty-four (24).Write the original IP address, a forward slash (/), and then the number from Step 2. The result is 192.168. 42.23/24.

How many bits in IP addresses on the network are used for the host part of the IP address?

32IP addresses: Networks and hosts An IP address is a 32-bit number that uniquely identifies a host (computer or other device, such as a printer or router) on a TCP/IP network. IP addresses are normally expressed in dotted-decimal format, with four numbers separated by periods, such as 192.168.

Is 255.255 255.255 IP address valid?

No 255.255. 255.255 can’t be allocated to a host, because it is used as limited broadcast address(destination) i.e. when any host wants to broadcast information to all the hosts in its entire network it will assign the destination ip as 255.255. 255.255(ie send to all).

What is FFFF FFFF MAC address?

ffff. ffff , this is the special reserved MAC address indicating a broadcast frame. This is what makes an ARP Request a broadcast. Had Host A chosen to send this frame using a specific host’s MAC address in the destination, then the ARP request would have been unicast.

What are the 3 classes of subnet mask?

The three default subnet masks are 255.0. 0.0 for Class A, 255.255. 0.0 for class B, and 255.255. 255.0 for Class C.

Can 255.255 253.0 be a subnet mask?

15 Can 255.255. 253.0 be a subnet mask? … No, it cannot be a subnet mask because if 9 bits then it equal 11111110, and 10bits then 11111100; therefore, there is no between.

What are the 4 parts of an IP address?

IP Address ComponentsAddress Class. Early in the development of IP, the IANA (Internet Assigned Numbers Authority) designated five classes of IP address: A, B, C, D, and E. … Default Subnet Mask. … The Network Field. … The Host Field. … Non-default Masks. … The Subnet Field.

What is the organizational motivation for subnetting?

The organizational motivation for subnetting is that it facilitates autonomy for the IT groups within organizational units.

What is the 0.0 0.0 IP address?

0.0. In the Internet Protocol Version 4, the address 0.0. 0.0 is a non-routable meta-address used to designate an invalid, unknown or non-applicable target. This address is assigned specific meanings in a number of contexts, such as on clients or on servers.