- What metals can be silver soldered?
- Can you solder without flux?
- Can I use Vaseline instead of flux?
- What can be used instead of flux?
- What metals does solder not stick to?
- Can white metal be soldered?
- Will solder adhere to steel?
- Is there a substitute for solder?
- Can you weld or solder white metal?
- What does white metal mean?
- Can you weld white metal?
- Can metal be soldered?
What metals can be silver soldered?
Silver Solder can be used to join most common metals, including Mild Steel, Stainless Steel, Copper, Brass, Cast Iron and Dissimilar Metals..
Can you solder without flux?
It’s ok, if you can do it, but it’s very difficult to solder without flux. The flux breaks down the oxide layers on the metal surfaces and allows the solder to “wet” them. If it doesn’t wet, it doesn’t make a connection. … It’s normally always necessary to use flux when you solder.
Can I use Vaseline instead of flux?
Can I use a Vaseline instead of flux? This question might just linger in your mind at the moment. The answer is yes. Using petroleum jelly as a soldering flux is an effective soldering flux alternative.
What can be used instead of flux?
A: The classical fluxes were wood rosin and acid solutions – both intended to protect even etch the top surface when it gets hot and is likely to oxidize. Instead, you can place a puddle of solder on one (horizontal) surface, and with a pen knife blade, scratch the metal under the blob.
What metals does solder not stick to?
Basically all metals can be soldered, but we are looking for a low melting point soft solder and a flux. With the soft solders and a zinc chloride flux (most common), these metals will bond very easily: copper, tin, and brass. These metals will NOT bond: Iron, stainless steel, steel, and aluminum.
Can white metal be soldered?
Phil, First try this with some scrap white metal. I use 70 degree solder, set the iron to 200 degrees, put plenty of flux on the joint, (I use carrs red) then put some solder (not too much) on the iron and touch it to the parts that need soldering. NOTE do not linger with the iron as you will melt everthing.
Will solder adhere to steel?
You can even use solder to join copper or brass to stainless steel, you just need the proper flux. … If you must use a paste flux, use it sparingly. Use plumbing (silver) solder only. Do not use electrical or jeweler’s solder because these often contain lead or cadmium.
Is there a substitute for solder?
soldering two wires together doesn’t even require a soldering tool, but if you need to do some more intricate work, steel is the best choice for an impromptu tool. Steel wire, screwdrivers, nails, and Alan wrenches are all potential tools for your emergency soldering.
Can you weld or solder white metal?
White metal, also known as “pot metal” is not weld repairable. There is a type of high-temperature solder that can fix it, but it’s what i would call a “late-night TV tool” You know, the kind where they’ll double your order, and throw in a free set of ginsu knives just for calling within the next 10 minutes.
What does white metal mean?
1 : any of several light-colored alloys used especially as a base for plated silverware and ornaments and novelties. 2 : any of several lead-base or tin-base alloys (such as babbitt) used especially for bearings, fusible plugs, and type metal.
Can you weld white metal?
The welding rod may be of pure zinc or a die-casting alloy of the same type as that to be welded. Metal flux (50 percent zinc chloride and 50 percent ammonium chloride) can be used, but is not mandatory.
Can metal be soldered?
Metals that can be soldered include gold, silver, copper, brass, and iron. The filler, called solder, melts. When it solidifies, it is bonded to the metal parts and joins them. The bond is not as strong as brazed joint or welded one.