- Can you raid different brand drives?
- How can I rebuild RAID 5 without losing data?
- Does RAID 1 need identical drives?
- How do I restore raid?
- Can you RAID 5 with 2 drives?
- What is the difference between RAID 1 and 5?
- Can RAID 1 have more than 2 drives?
- Can RAID 5 drives be different sizes?
- How many drives do you need for RAID 5?
- How do I replace a RAID 1 drive?
- Can you hot swap a RAID 1 disk?
- Do RAID 5 drives need to be identical?
- Which RAID is best?
- Can you do RAID 1 with different size drives?
- Do NAS hard drives have to be the same size?
Can you raid different brand drives?
Must hard drives in a RAID array be identical.
It is perfectly valid to use hard drives from different manufacturers, model numbers, sizes and rotational speed (spindle speed or rpm)..
How can I rebuild RAID 5 without losing data?
RAID 5 is rebuilt, but data is lost?Download and install Diskinternals RAID Recovery. … Open the RAID Wizard and select RAID members.Use Reader or Uneraser mode to open the logical disk (it is contained in the hard drive section of the RAID disk).More items…
Does RAID 1 need identical drives?
Drives don’t have to be the same. THe new one only needs to be larger. Identical is ideal, but no RAID requires identical drives.
How do I restore raid?
How to recover RAIDDownload, install, and launch ReclaiMe Free RAID Recovery software.If needed, open or create disk image files of the member disks using the Disks button.Decide on the type of your array. … Wait until the software completes detecting the parameters. … At the step all the parameters have been already restored.
Can you RAID 5 with 2 drives?
You can indeed run a RAID 5 with only two drives but it’s degraded and a single bit failure on either drive will bring down that RAID. Dell calls this a RAID Puncture and the only recovery is to restore from backup.
What is the difference between RAID 1 and 5?
RAID 5. RAID 1 is a simple mirror configuration where two (or more) physical disks store the same data, thereby providing redundancy and fault tolerance. RAID 5 also offers fault tolerance but distributes data by striping it across multiple disks.
Can RAID 1 have more than 2 drives?
RAID-1 can definitely be more than 2 disks. It’s just more redundancy, not more space. It means sequential writes, but some controllers will be able to do parallel reads (but keep in mind that read/write conflicts can ruin that concept pretty quickly).
Can RAID 5 drives be different sizes?
You can use RAID 5 with different sized disks physically, but within the RAID features they all have to be identicle.
How many drives do you need for RAID 5?
threeThe minimum number of disks in a RAID 5 set is three (two for data and one for parity). The maximum number of drives in a RAID 5 set is in theory unlimited, although your storage array is likely to have built-in limits. However, RAID 5 only protects against a single drive failure.
How do I replace a RAID 1 drive?
Turn on the system.Click Start.Click All Programs.Click Intel.Click Intel® Rapid Storage Technology.Click Rebuild to another disk.Select the replacement hard drive and click Rebuild.
Can you hot swap a RAID 1 disk?
If you’re interested in using hot-swapping in a RAID configuration, your best option is to use RAID Level 1 architecture, also know as “disk mirroring.” With RAID 1, all of the server data is mirrored onto multiple disks. … Most newer IDE and SCSI hard disks support hot-swapping.
Do RAID 5 drives need to be identical?
Some RAID configurations require synchronised disk spindles but RAID-5 does not. It’s generally strongly advised to use disks of the same model and the same firmware revision in a RAID array, to minimize risk.
Which RAID is best?
The best RAID for performance and redundancyThe only downside of RAID 6 is that the extra parity slows down performance.RAID 60 is similar to RAID 50. … RAID 60 arrays provide high data transfer speeds as well.For a balance of redundancy, disk drive usage and performance RAID 5 or RAID 50 are great options.More items…•
Can you do RAID 1 with different size drives?
In theory it is possible but we recommend using same model hard drives (with identical firmware) throughout the system for performance and disk utilization concerns. … The larger drives will become equivalent size of the lowest (smallest) drive capacity under RAID.
Do NAS hard drives have to be the same size?
Some NAS units absolutely require drives to be identically sized. If it is only capable of presenting one Volume to the network, this is good because dissimilar drives create wasted space. More advanced NAS units can present multiple Volumes, so you can deal with have sets of differently sized drives.